Plug the RS232 cable into both the PC and the receiver (keep the receiver powered off at the back switch). Launch the Tool: Right-click ALIMUPG610.exe and select Run as Administrator Configure COM Port:
: Power off the receiver completely using the back switch or by unplugging it. Hardware Connection : Connect the receiver to your PC using the RS-232 cable. Software Setup : Launch the ALi Mini Upgrade tool on your PC. File Selection to select the firmware file (usually ending in ) you wish to install. Configuration : Select the correct being used by your computer. Initiate Flash in the software, then immediately power on the receiver. Finalization Download ali mini upgrade 6.10 gratuit
Connect your PC to the receiver using the RS232 cable. Keep the receiver at the back power button (or unplugged). Step 2: Configure the Loader Open Ali_Mini_Upgrade_6.10.exe . Plug the RS232 cable into both the PC
As the progress bar crawled toward 100%, Lukas felt a surge of adrenaline. He loaded the file onto a dusty USB stick and plugged it into the back of the receiver. The screen turned blue. “Upgrading... Do not power off.” Software Setup : Launch the ALi Mini Upgrade tool on your PC
: Uploading pre-configured channel lists to the receiver. Prerequisites for a Successful Upgrade