Jbl N7000 Schematic !!better!! 〈720p 2025〉

The is a classic frequency dividing network (crossover) designed primarily to integrate JBL high-frequency transducers, such as the 075 (bullet tweeter) or 077 , into existing two-way speaker systems. It operates at a fixed crossover frequency of 7,000 Hz with a slope of 12 dB per octave . Circuit Overview and Schematic Details

(L-pad) to adjust the output level of the tweeter without affecting the crossover point or the operation of other drivers. Wiring & Integration The N7000 is typically connected to the high-frequency terminals of a "main" network (such as the ) rather than directly to the amplifier. www.cieri.net Impedance: Designed for use with Standard Configuration: Receives signal from the main network’s HF output. Low Output: jbl n7000 schematic

Wait—sharp-eyed engineers will notice something unusual. In most second-order crossovers, the high-pass uses a series capacitor followed by a shunt inductor to ground. The N7000 is different. It uses a series capacitor (C1) followed by a series inductor (L1) . This configuration creates a second-order high-pass filter, but the inductor is in series with the load rather than shunting to ground. This is a deliberate JBL design choice to maintain phase coherence between the drivers at the 7,000 Hz crossover point. The is a classic frequency dividing network (crossover)

Uses a capacitor in series with the signal to protect the tweeter from high currents below 7 kHz. Wiring & Integration The N7000 is typically connected